In short
If the garage door starts to close and comes back up, or the opener light blinks, the safety sensors near the floor are usually misaligned, dirty or have a damaged wire. Wipe the lenses and check both lights are steady; if it still won't close, a technician in Pound Ridge realigns or replaces the sensors and tests the safety reverse.

Doors that won't close in Pound Ridge
Nearly a third of Pound Ridge is preserved open space, and the rest is houses on wooded lots of three acres or so, behind old stone walls. Around the reservation edge and on the Mianus gorge side, garages get leaves, pine needles, pollen and plenty of wildlife: mice chew sensor wire, and spiders build across the lens within days. Long unpaved or gravel driveways bring grit to the door. In Scotts Corners and the hamlet, older houses have small garages and barns with uneven floors. Power cuts are frequent here, and after one the opener may need a moment before the sensors read correctly.
Why a garage door refuses to close
- Door starts down, then goes back up. Something is blocking, or seems to be blocking, the two safety sensors near the floor.
- Opener light blinks and the door stays open. The sensors have lost sight of each other: a bumped bracket, a dirty lens or a broken wire.
- Door closes only if you hold the wall button. That is the opener overriding its sensors. It tells you the sensors are the problem, and it is not a way to run the door day to day.
- Door closes, touches the floor and reopens. The travel or force setting is off, or the floor has heaved and the door thinks it hit something.
Three safe checks before you call
- Look at the small lights on both sensors. Each should be on and steady.
- Wipe both lenses with a dry cloth and make sure nothing is leaning in the doorway.
- Gently turn the blinking sensor until its light goes steady, then try the remote again.
If that doesn't do it, stop there. Don't tape the sensors together or bypass them.
What the technician does
- Checks power and wiring to both sensors and repairs any break.
- Realigns the sensors, or replaces the pair if one has failed.
- Resets the open and close travel so the door seals without straining.
- Tests the automatic reverse on an object in the doorway and with the beam blocked.
Around Pound Ridge
- Mianus gorge side: The western part of town near the Mianus River gorge and the Bedford line.
- Three-acre roads: Most of the town: long drives, stone walls and homes set deep in the woods.
See the full Pound Ridge service area.